SL1000
3.
Loosen two screws and remove the Main-cover.
Two screws
4.
Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 408E/008E/000E/1PRIU)
If no more Expansion Interface cards are to be mounted on the 1st PCB, fasten two screws to
secure the 1st PCB on the top of the 408E/008E/000E/1PRIU.
Expansion Interface Card
(1st PCB)
J1
Nylon-Spacers
J2
Figure 2-65 Mounting of the 1st Expansion Interface Card
2-44
Main-Cover
Hooks
Figure 2-64 Removing the Main-cover
ISSUE 3.0
Screws
Screw position
1st EXP.
PCB
Both sides are
the same.
Metal-Spacers
Installation