Cooling System Maintenance; Removing Debris From Engine Cooling System; Changing Engine Coolant - Toro 07360 Operator's Manual

Figure 59
1. Turn buckle
Cooling System
Maintenance
Removing Debris From Engine
Cooling System
Service Interval: Before each use or daily (Clean more
frequently in dirty conditions.)
1. Turn engine off. Clean engine area thoroughly of
all debris.
2. Lift and remove radiator screen from front of
radiator.
1. Radiator screen
3. Clean radiator and screen thoroughly with
compressed air.
Note: Blow debris away from radiator.

Changing Engine Coolant

Service Interval: Every 1,000 hours/Every 2 years
(whichever comes first)
1. Park machine on a level surface.
2. Raise bed (if so equipped) and place safety support
on extended lift cylinder to hold up bed.
47
Figure 60