Install The Wheels; Install The Steering Wheel - Toro 07360 Operator's Manual

1. Fender
3. Secure rear of each tail light bracket to rear of
frame brackets with a 5/16 x 1 in. bolt, .344" I.D.
flatwasher and locknut, as shown in Figure 3.
1. Fender
4. Loosely secure a fender to each side of frame with
a support plate, (5) 3/8 x 1–1/4 in. bolts, and a
locknut as shown in Figure 4.
Note: Weld nuts are in place to secure (4) of the
bolts.
5. Tighten all fasteners.
Figure 3
Figure 4
2. Support plate
2

Install the Wheels

Parts needed for this procedure:
10 Wheel nut
2 Front wheel
10 Wheel nut
2 Rear wheel
Procedure
1. Remove lug nuts securing wheels to wheel brackets.
Retain lug nuts.
2. Mount wheels and install lug nuts. Torque lug nuts
to 45–65 ft-lb.
1. Wheel
14
Figure 5
2. Wheel nut