Service And Repairs; Wheels - Toro Sand Pro 3040 Service Manual

Service and Repairs

Wheels

Removing the Front Wheel
g350145
1. Front fork
2. Lock nut (2 each)
3. Hydraulic tube
4. Tube clamp assembly
5. Hydraulic tube
6. Cap screw (2 each)
7. Front wheel motor assembly
8. Spindle
Sand Pro ® 3040 and 5040
20251SL Rev A
9. Wheel and tire
10. Lug nut (2 or 4 each)
11. Bearing tab
12. Flangette – standard
13. Bearing
14. Flangette – lube
15. Cap screw (3 each)
16. Grease fitting
1. Park the machine on a level surface, lower any attachments, engage the
parking brake, set the key switch to the O
from the switch.
Before lifting the machine with a jack, review and follow
Instructions (page 1–6).
2. Support but do not raise the front of the machine.
3. Remove the fasteners that secure the hydraulic tube clamp to the front fork.
Figure 89
17.
18.
19.
20.
21.
22.
23.
FF
IMPORTANT
Page 7–3
Set screw
Flange nut (3 each)
Wheel weight adapter (2 each)
Stud (2 each)
Wheel weight
Thrust washer (2 each)
Lock nut (2 each)
position and remove the key
Jacking
Chassis: Service and Repairs