Removing and Installing the Rear Lift Relief Manifold (continued)
Hydraulic System: Service and Repairs
8. Remove the caps and plugs then connect the hydraulic lines to the manifold
fittings; refer to
Installing Hydraulic Hoses and Tubes (O-Ring Face Seal
Fitting) (page
5–7).
9. Charge the hydraulic system; refer to
5–64).
10. Install the console to the machine; refer to
Operator's Console (page
Charging the Hydraulic System (page
7–24).
Page 5–86
Removing and Installing the
Sand Pro
®
3040 and 5040
20251SL Rev A