Toro Sand Pro 3040 Service Manual page 232

Removing and Installing the Rear Wheels (continued)
Chassis: Service and Repairs
Before lifting the machine with a jack, review and follow
Instructions (page 1–6).
2. Raise the machine so the rear wheel is off ground.
3. Remove the 4 lug nuts and remove the rear wheel.
4. To install the rear wheel, secure the wheel to the hub with the previously
removed lug nuts and tighten the nuts from 95 to 122 N·m (70 to 90 ft–lb).
IMPORTANT
Page 7–6
Jacking
Sand Pro ® 3040 and 5040
20251SL Rev A