Table of Contents
Advertisement
Web-based Management
ì
Change the settings:
Video Settings
Resolution
Image Quality
Power line
frequency
Adjustments
Brightness
Red, Green, Blue
Default
button
Options
Time Stamp
Text Display
Audio
Preview Video
44
Select the desired video resolution format. The default resolution
is set to 320 x 240.
Select the desired image quality. The default image quality is set
to Normal.
Note: Higher image quality requires more bandwidth.
Select the power line frequency (50 Hz or 60 Hz) used in your
region to improve the picture quality under fluorescent lighting.
Select Automatic or Manual. The default is set to Automatic in
which case the camera will automatically adjust the brightness
based on the current environment. Select Manual if you want to
adjust the brightness manually.
Adjust these colour settings to the preferred values.
Note: When Automatic is selected, these settings will not take
effect.
Clicking this will set all the Adjustment fields to their default val-
ues. You must click Apply to save these changes.
Enable the check box if you want the time to be displayed on the
video image.
If you want text to be displayed on the video image, enable this
feature by ticking the checkbox. You can enter text up to
20 characters. This feature is often used to identify a camera
when multiple cameras are installed.
If you want audio to be included with the video, enable this
option. Some bandwidth will be allocated to the audio stream. In
some situations, this may affect the quality of the video.
Click the button to open a preview window showing your
changed settings.
Advertisement
Table of Contents
