Table of Contents
Advertisement
Introduction
Ready LED
On – Power on.
Off – No power.
Blinking – The Ready LED will blink during start up. This will take 15 to 20 seconds.
Active LED
Off – Idle.
Blinking – Gigaset WLAN Camera is providing a live video stream to at least one
viewer.
LAN LED
On – LAN port is connected to a hub or switch.
Off – LAN port is not connected.
Blinking – Data is being transmitted or received via the LAN port.
Wireless LED
On – Wireless interface is active.
Off – Wireless interface is not available.
Blinking – Data is being transferred via the wireless interface.
Rear Panel
8
Antenna
Attach the supplied antenna here.
Power Input
Connect the supplied power adapter
here.
MIC IN
If required, an external microphone
can be attached here. Attaching a
microphone here will disable the
built-in microphone on the front.
Microphones designed to be used
with PCs are usually compatible with
this microphone input.
Advertisement
Table of Contents
