Table of Contents
Advertisement
LAN port
Use a standard LAN cable to connect your Gigaset WLAN Camera to a 10/100BaseT hub
or switch.
Note:
On the Gigaset WLAN Camera, attaching the LAN cable will disable the wireless
interface. Only 1 interface can be active at any time.
Reset Button
This button has two functions:
u
Restore default IP address: When pressed and released, the Gigaset WLAN Camera
will reset its IP address to the default value of 192.168.2.252.
u
Restore default IP address, administrator ID and administrator password: When
pressed and held for 3 seconds, the IP address, administrator ID and administrator
password settings will be set to their default values.
– IP address: 192.168.2.252
– Administrator ID: admin
– Administrator password: null (no password)
Note:
When the process is completed, the Ready LED will blink three times to confirm that
the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing,
please contact your dealer immediately.
1. Gigaset WLAN Camera
2. CD-ROM with software and User Guide (english)
3. Quick Installation Guide
4. Power adapter
5. Base, stand and swivel connector
6. Extender unit
7. Mounting screws
8. Antenna
Introduction
9
Advertisement
Table of Contents
