Traversing Axes - Siemens SINUMERIK 840D sl Operating Manual

Working in manual mode

3.3 Traversing axes

3.3 Traversing axes
You can traverse the axes in manual mode via the Increment or Axis keys or handwheels.
During a traverse initiated from the keyboard, the selected axis moves at the programmed
setup feedrate. During an incremental traverse, the selected axis traverses a specified
increment.
Set the default feedrate
Specify the feedrate to be used for axis traversal in the set-up, in the "Settings for Manual
Operation" window.
110
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning