Drilling With Manual Machine - Siemens SINUMERIK 840D sl Operating Manual

Approach and retraction
When machining the workpiece, you traverse from the current position to the machining start
point. After the machining process, the tool is returned along a direct path to the starting
point.
13.6.1

Drilling with Manual Machine

The same range of technological functions (cycles) is available as in automatic mode for
drilling on the face or peripheral surface of a workpiece:
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
⇒
Working with Manual Machine
13.6 More complex machining
⇒
⇒
⇒
⇒
613