Siemens SINUMERIK 840D sl Operating Manual page 531

Editing a program in the block display
If there is not sufficient space, you switch over into the single-channel view.
Running-in a program
You select individual channels to run-in the program at the machine.
Requirement
● Several channels have been set-up.
● The setting "2 channels", "3 channels" or "4 channels" is selected.
Displaying/hiding a multi-channel view
...
Turning
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
9.2 Multi-channel view in the "Machine" operating area
You can perform simple editing operations as usual with the <INSERT>
key in the actual block display.
1. Select the "Machine" operating area
2. Select the "JOG", "MDA" or "AUTO" mode.
3. Press the menu forward key and the "Settings" softkey.
4. Press the "Multi-channel view" softkey.
Multi-channel view
531