Siemens SINUMERIK 840D sl Operating Manual page 510

Programming technology functions (cycles)
8.7 Additional cycles and functions in ShopTurn
Parameters
X
Y
Z
U
C
C1
C3
Z3
AWZ
GS
F
Radius compensation
510
Description
Target position X ∅ (abs) or target position X referred to the last programmed
position (inc)
Target position Y (abs) or target position Y referred to the last programmed
position (inc)
Target position Z (abs) or target position Z referred to the last programmed
position (inc)
Target position (abs) or target position referred to the actual position (inc)
Target angle (abs) or target angle referred to the actual position (inc)
Target position of C axis of main spindle (abs or inc)
Target position of C axis of counterspindle (abs or inc)
Target position of special axis (abs or inc)
Note:
Incremental dimension: The sign is also evaluated.
Target angle (abs) or target angle referred to the actual position (inc)
Target angle (abs) or target angle referred to the actual position (inc)
Machining feedrate
Alternatively, rapid traverse
Input defining which side of the contour the cutter travels in the traversing
direction:
Radius compensation to right of contour
Radius compensation to left of contour
Radius compensation off
The previously programmed setting for radius compensation is used.
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Unit
mm
mm
mm
mm
Degrees
mm
mm
mm
Degrees
Degrees
mm/rev
mm/min
mm/tooth
Turning