Connecting Line And Motor Terminals - Siemens G120P Technical Manual

5.3.2 Connecting line and motor terminals

5.3.2.1 Overview of line and motor connections
IP20 FSA...FSC
IP20 FSD...FSF
Siemens
Building Technologies
The following diagrams show the arrangements of the line and motor terminals on
the relevant Power Module of frame sizes FSA to FSF. The permissible tightening
torques for terminals are listed in the table titled "Overview of tightening torques".
Figure 8: IP20 FSA-FSC
Item Designation
1
Detachable mains connector
2
Release lever
3
Release lever
4
Detachable motor connector
The Power Modules are equipped with two-part connectors. You can remove the
detachable part of the connector from the Power Module by pressing the
unlocking device. The connectors cannot be mixed up.
1
Figure 9: IP20 FSD-FSF
Item Designation
1
Power supply
2
Motor connection
Installing the Power Module
2
Installing
5
31 | 98
A5E36496664A_d
2016-03-17