Sony DVS-9000 User Manual page 91

3
When assigning a video signal, press [Video] in the <Xpt> group. When
assigning a key signal, press [Key].
4
Use any of the following operations to assign the signal.
• Press directly on the list in the status area.
• Press the arrow keys to move the reverse video cursor.
• Turn knob 3 to make the setting.
Knob
3
To inhibit operation of certain button numbers
In the Panel>Xpt Assign menu, select the button number you want to inhibit,
then press the [Inhibit] button.
Setting the source signal name and source name display color
Use the following procedure.
1
In the Panel>Xpt Assign menu, press [Source Select].
The Source Select menu appears.
2
Turn knob 1 to select the signal to be set.
Knob
1
3
To set the source name, press [Source Name].
A keyboard window appears.
4
Enter any name of not more than 16 characters, then press [Enter].
For details of keyboard window operation, see "Menu Operations" in
Chapter 2 (Volume 1).
5
To set the source name display color, in the <LCD Color> group select the
color (Orange/Green/Yellow).
Using multi cross-point assign tables
In addition to the normal assignment ("main table"), as "cross-point assign
tables" you can create up to four "sub" tables (Sub1 to Sub4). However, you
Parameter Adjustment
Source No Selection of source to be assigned
Parameter Adjustment
Source No Source signal selection
Setup Relating to Operations From the Control Panel
Setting values
1 to 128
Setting values
1 to 128
91