The File>Effect, Snapshot>Load menu appears. The top side of the status
area shows the location where the file is saved, and the bottom side shows
the register.
2
If necessary, change the currently selected medium for recording ([HDD]
or [Memory Card]). (See "Selecting the Recording Medium" (page 149).)
3
In the <Category> group, select what the operation applies to.
Effect: keyframe effect file
Snapshot: snapshot file
4
In the <Select> group, choose the method of selection, and in the status
area, select the files.
All: When this is on, all files are selected for the operation.
Plural: When this is on, you can specify a number of files to which the
operation will apply. In this case, in the status area, press the number
or name of the desired files, turning them to reverse video. To cancel
a selection, press once more to return to normal display.
When both of the above buttons are off: You can specify any file, using
either of the following methods.
• Press the arrow keys to scroll the reverse video cursor.
• Press directly on the list appearing in the status area.
5
Press [Load].
This recalls the file from the specified location.
Copying Files
To copy a file between the hard disk and memory card, use the following
procedure.
1
In the File menu, select VF3 'Effect, Snapshot' and HF3 'Copy.'
The File>Effect, Snapshot>Copy menu appears. The top side of the status
area shows the copy source, and the bottom side shows the copy
destination.
Operations on Individual Files
151