Operation Settings (Operation Menu) - Sony DVS-9000 User Manual

7
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
Test firing the trigger
To test fire the trigger, press [Test Fire].
This outputs a trigger from the selected output port. This is not output when the
trigger type is "Status."
Setting the control mode for P-BUS devices
In the <P-Bus Control> group of the Panel>Device Interface menu, select the
mode.
Trigger: When a predetermined button is pressed, the action command
assigned to that button is output, to control an external device.
Timeline: The external device is controlled as a keyframe effect controlled by
the center control panel.

Operation Settings (Operation Menu)

To make settings relating to panel operation, use the Panel>Operation menu.
To display the Operation menu
In the Engineering Setup menu, select VF2 'Panel' and HF6 'Operation.'
The status area shows the items that can be set and a list of the settings.
Setting the on-air tally
To set the high tally state reflected on the control panel, select any of the
following in the <Button Tally> group.
System: The overall system tally state is reflected on the control panel.
Independ: The tally state of the switcher only is reflected on the control panel.
Making settings relating to effects
To make settings relating to the functions used when carrying out keyframe
effect operations, use the following procedure.
1
In the Panel>Operation menu, press [Effect Mode].
The Effect Mode menu appears.
The status area shows a list of the items with their settings.
Setup Relating to Operations From the Control Panel
99