Panasonic DX-600 Network Fax Manual page 83

Fax Parameter Table
No. Parameter
156 PRINT FORWARDED
DOCUMENT
157 TRANSACTION
JOURNAL
158 PC REMOTE
UPDATE
159 SUBJECT LINE
ENTRY
160 DEFAULT DOMAIN
161 DNS SERVER
162 TIFF VIEWER URL
163 ROUTING HEADER
164 IFAX XMT HEADER
(Email only)
169 DHCP CLIENT
170 SMTP
AUTHENTICATION
(See Note 3)
171 POP BEFORE SMTP
(See Note 3)
Continued on the next page...
Setting
Setting
Number
1 Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
2 Always
incomplete.
1 Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
2 Valid
1 Invalid Selecting whether the machine will accept commands from
an email application, to:
2 Valid
(a) Program the Internet Parameters
(b) Program the Auto Dialler
(c) Allow retrieval of the Journal
1 Invalid Selecting whether the "Subject" line can be programmed
during each transmission.
2 Valid
1 Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialling.
2 Valid
1 Invalid Selecting whether to use the DNS Server for the Internet
communication.
2 Valid
1 None Selecting whether to include the URL address in the email
message body.
2 English
3 English+
Japanese
1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed pages.
2 Valid
1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
2 Not Included
specified in the Default Domain parameter. (This is useful
when using the machine to scan documents back to your
PC)
Note: When sending to a Domain other than as specified
1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such as
2 Valid
IP Address, Subnet Mask, Default Gateway IP Address,
etc.)
Note: If you change the setting of this parameter, the
1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication with a user name and
2 Valid
password before accepting email. After change the setting
to "Valid", you can enter the user name and password
assigned to your machine by your network administrator.
1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication by first retrieving incoming
2 Valid
email from the POP Server before accepting email.
(Please consult with your network administrator).
Customizing Your Machine
Comments
in the Default Domain parameter, the header will be
included regardless of the selection.
machine will reboot automaticaly.
83