Panasonic DX-600 Network Fax Manual page 80

Customizing Your Machine
Fax Parameter Table
No. Parameter
031 INCOMPLETE FILE
032 COPY REDUCTION
034 ENERGY SAVER
035 DAYLIGHT TIME
037 RCV TO MEMORY
038 ACCESS CODE
039 PIN CODE ACCESS
042 CONF. POLLED FILE
043 PASSWORD-XMT
044 PASSWORD-RCV
046 SELECT RCV
80
Setting
Number
1
SAVE
2
1
2
1
MODE
2
1
2
1
2
3
1
SAVE
2
1
2
1
2
1
2
Setting
Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
Valid
Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Auto
Manual : The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
Off To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
Energy-
(1 to 120 minutes) for the machine to enter into the
Saver
selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
Energy-Saver Mode : Saves energy by consuming less
Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
Valid
at 2:00 am on the first Sunday in April and fallback 1 hour
at 2:00 am on the last Sunday in October.
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (See page 170)
(----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 168)
None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 175)
Suffix
Prefix
Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
Valid
Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
On
receiving station when transmitting. (See page 196)
Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
On
transmitting station when receiving. (See page 197)
Invalid Selecting whether the machine performs selective
reception. (See page 194)
Valid
Comments
: The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
power than when in standby mode
by turning off the fuser unit after
the specified time.