Asus AX-145 Quick Installation Manual page 10

AX-125/145 SIP VoIP Router Quick Installation Guide
Table 1: IVR command codes
Code
****
Main 100# Network Status Gives you the WAN IP and SIP registration
Menu
200# LAN Config
Sub- 201#
Menu
202#
203#
#
Setting up your IP address
To obtain an IP address automatically
Basically, setting your Network Interface to "Obtain an IP address automatically"
enables you to obtain an IP address via the DHCP protocol. Otherwise, you must
configure your Network Interface manually.
To configure an IP address manually
To set your IP address manually, you need to know the following settings:
Microsoft Windows XP [Version 5.1.2600]
<C> Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\louie_chavez>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
8
Status Function
Main Menu Enables you to enter the IVR menu.
status.
Configure LAN interface.
Gives you the LAN IP and LAN netmask status.
Enables you to set the LAN IP.
For example, to set LAN IP to "192.168.10.1",
enter 192*168*10*1#
Enables you to set the LAN netmask.
For example, to set the LAN netmask to
"255.255.255.0", enter 255*255*255*0#
A single # takes you back to the Main Menu.
Connection-specific DNS Suffix
IP Address....................... .: 192.168.1.101
Subnet Mask ......................: 255.255.255.0
Default Gateway ..................: 192.168.1.1
.: