Table of Contents
Advertisement
AX-125/145 SIP VoIP Router Quick Installation Guide
3.6.2
Port redirect
The Port Redirect function allows you to specify the port/IP address and service
type to redirect traffic to a local device in the LAN.
To enable Port Redirect
1. From the menu, click NAT -> Port Redirect. The Port Redirect screen is
displayed.
2. In Port Redirect, check Enable, and then click Apply.
3. Click the Add Rule button for a detailed setup. The screen shown below is
displayed.
In the Redirect IP/Port field, enter the IP address and port to redirect to.
Specify the Service to be Redirected either through choosing from the Well-
known drop-down list, or defining the Custom protocol and port.
After configuring the settings, click the Add Now button to save the settings.
26
Advertisement
Table of Contents
