Asus AX-145 Quick Installation Manual page 25

3.5.2 LAN to WAN
You can define some LAN to WAN rules for AX-125/145 firewall function.
To enable LAN to WAN ACL
1. From the menu, click Firewall -> LAN to WAN. The LAN to WAN ACL settings
screen is displayed.
2. Under ACL Usage, click Enable. When you enable the ACL, you may also
choose to enable the ACL Log function.
3. When LAN to WAN ACL is enabled, you can choose the Default Policy as
either Allow or Drop to work with the exception rules you have defined. Refer
to To add an exception rule for more details.
If the Default Policy is Allow, the exception rules will drop packets. If the
Default Policy is Drop, the exception rules will allow packets to pass through.
4. When done, click Apply.
To add an exception rule
1. From the LAN to WAN ACL settings screen, click the Add Rule button. The
figure shown below is displayed.
AX-125/145 SIP VoIP Router Quick Installation Guide
23