Table of Contents
Advertisement
AX-125/145 SIP VoIP Router Quick Installation Guide
4. SIP Operation Guide
4.1
IVR operation
You can pick up the phone set and dial "****" to enter the IVR main menu then
press the commands listed below to check or set the LAN IP. You can access
AX-125/145 WEB GUI after you have the LAN IP. Refer to Table 1 on page 7 the
IVR operation command codes.
You can select from these two (2) types of languages for the IVR voice prompt:
Chinese or English. Refer to section 3.4.1 System Setting on page 17 for more
details.
4.2
Call Service Features
ASUS AX-125/145 has some predefined call function services and they are
configurable by WEB GUI. Table 2 describes the operation of these call functions.
Table 2: Default Call Functions Settings
Function
Blind transfer
Attend transfer Flash + *88
Conference
Speed Dial
Phone book
dial
PSTN access
code
Call Pickup
34
Press key
(Default)
Flash + *98
Transfer the call to another party without notifying the
recipient.
Put the active call on hold and transfer the call to another
party. Put down your phone when transfer is done.
Flash + *89
Put the active call on hold, make a call to another party, and
press Flash key for a three-way conference call.
*68n
You can define eight speed dial entries (from 1 to 8) in the
AX-125/145's web GUI.
The value 'n' indicates the predefined speed dial number.
*67n
You can defined eight phone book entries (from 1 to 8) in the
AX-125/145's web GUI.
The value 'n' indicates the predefined phone book number.
*90
Switch the phone set connected to FXO RJ11 port of the
PSTN line. It will automatically switch back to VoIP after the
phone is put down.
*78n
Pick up the incoming call of another party on AX125/145.
The value 'n' indicates the predefined phone number of the
other party on AX125/145.
Usage
Advertisement
Table of Contents
