Asus AX-145 Quick Installation Manual page 14

AX-125/145 SIP VoIP Router Quick Installation Guide
3.2.1 WAN Settings
To configure the WAN settings
WARNING: The WAN access type MUST be configured correctly. If you are
not sure how to configure the WAN parameters, contact your Internet Service
Provider (ISP) for your WAN details.
1. From the menu, click WAN -> Setting. The WAN/Setup screen is displayed.
2. Select the access type you want to configure. There are three (3) access types:
DHCP client, Static IP, and PPPoE.
NOTE: If your ISP require you to specify the MAC address for authentication,
check Clone Mac under Link Setup and enter the MAC address.
3. When done, click Apply to save the WAN settings.
12