Table of Contents
Advertisement
Search by Alarm List
This unit stores the start time of alarm recording and emergency
recording in the alarm list when such recording begins. This
item is used to search the desired picture using the list of alarm
recording (emergency recording). The search result displays
in still frame playback of the single screen display.
User Menu
1
Search
Search by Alarm List
3
D
Alarm List
1. Set the date, month, year, hour, minute, second, and
step
sensor number to be searched.
Latest: Displays the date and time of the latest
recording.
2. Select "Alarm List."
step
The alarm list may take longer time to display completely
when there are many items in the list or when a HDD has
been added.
The displayed alarm list shows the list of alarm recordings
which have been started before and closest to the specified
time.
3. Select the alarm list you want to display.
step
To change the source device to be searched, set the
desired device in the <Select Source Device> (User
Menu Search Select Source Device).
To execute alarm list search while the "Alarm area" and
"LPA area" are set, set the playback area to "Alarm" and
"LPA" respectively.
"Sensor" display indicates the sensor number of which the
alarm signal is input.
When "Repeat of Normal Recording Area" or "Repeat of
Alarm Recording Area" (System Menu
Management Setting for Main Memory) is set to "Repeat
Off" and there is an alarm recording (emergency recording)
at the end of the HDD, that recording may not be stored in
the alarm list and that item may be missed.
When the data of the camera number which is not
corresponded to the alarm sensor number is copied to the
external media, the alarm list of that data is not exactly
similar to that of listed in the digital recorder.
When the detection of the motion or the ground of the
ALARM IN terminal occurs numerously at the same time,
not all the start times of the alarm recording may be
registered in the alarm list. In this case, the sensor of the
lowest number is registered in the list.
In the alarm list, items with the ALARM IN terminal
grounded are indicated in orange, items that were detected
with motion are indicated in white, items with the
EMERGENCY terminal grounded are indicated in magenta,
and items that were input with alarm signal via
communication are indicated in green.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations
To clear the alarm list, erase the HDD data of which the
alarm recording is recorded (System Menu Data Clear).
Beware that executing it erases all the data of the HDD
contained the picture data.
Alarm list search is not performed if there are no index
signals.
When alarm recording (emergency recording) is started
while displaying the <Alarm List>, you must first exit the
<Alarm List> and then display it again. The new item is
added to the list. In this case, you may have to specify the
1, 2
steps
date and time to be searched again.
For alarm list search of LPA area, the list from the start
3
step
point of media is displayed when selecting "To latest," and
the list from the end point of media is displayed when
selecting " To oldest."
Memory
Data
19
Advertisement
Table of Contents
