Nas Setup - Mitsubishi Electric DX-TL5000EZ User Manual

Communications by Web Browser (continued)
2. (When making the settings to send the e-mail • • •)
Input the desired settings for "SMTP Server (Host Name
or IP)," "POP Server (Host Name or IP)," "POP User
ID," "POP User Password," "DNS Server 1 Address,"
"DNS Server 2 Address," "From:," and "Recorder ID."
• The settings currently set are shown in the "Current
Settings."
The maximum number of characters that can be used to
set the e-mail address is 49.
3. To send the test e-mail, select "From Address Test (send
test mail)" and left-click.
4. (When attaching alarm recording picture to e-mail • • •)
Put a check mark on "Picture" checkbox.
• E-mail with the picture which is captured during
alarm recording is sent to the marked user. The file
extension of the picture data file which is attached
to e-mail is ".aap".
• "Delay time to attachment" is used to determine the
timing of capturing the picture to be attached. The
time period between occurrence of alarm and
capture of the picture can be set up to 10 seconds.
You cannot send the picture when the alarm recording is
not performed.
The picture to be attached is captured during alarm
recording of which trigger is input of the rear terminal.
To perform this function, put a check mark on "Sensor."
When the multiple notifications are occurred at the same
time, notification may be delayed or not all the items may
be notified.
When the alarm recording time is shorter than the specified
delay time, the picture cannot be attached.
When the multiple alarm signals are input at the same
time, only the picture from the camera corresponding to
the lowest sensor number is attached.
To view the attached picture:
In the PC with the supplied application software installed,
click or double click the file.
In the PC without the supplied application software
installed,
drag the file and drop it into the "MPicViewer.exe" which
is stored in the supplied CD.
The displayed picture can be printed or can be saved in
general image formats.
5 . (When setting the receiver's address • • •)
-1
Enter the desired e-mail address to "New Address."
5 . Set the contents to be transmitted from the recorder to
-2
the PC.
• "Remain," "Temp/Fan," "Reboot," "Record," "Alarm,"
and "Sensor" settings can be set.
5 . Select whether to activate or inactivate the e-mail
-3
address you have set.
• When a check mark is put to "Active" column, the
selected e-mail address becomes active.
5 . Select "set" and left-click.
-4
5 . Select "send" to send the test e-mail.
-5
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
30
When the e-mail notifications or IP notifications have been
occurred frequently, the operation of the recorder may
become unstable.

NAS Setup

This is the screen for making the settings to connect to the
NAS server, and for mounting or removing the NAS server.
Check the NAS information before setting this menu.
1. Select "NAS Setup" and left-click.
• The "[NAS Setup]" screen appears.
2. Input the desired settings for "IP Address" and
"Directory."
3. Select "set" and left-click.
4. (When removing the NAS server • • •)
Select "remove" and left-click.
5. (When execute the mount test • • •)
Select "test" and left-click.
While the recorder is in copy 1, copy 2, or restore, NAS
Setup cannot be set. Stop such operations first before
setting NAS Setup.