Table of Contents
Advertisement
Setting the time and date
Time/Date Setting (Setup Menu
Date Setting)
This item is used to set the present date, time, and auto daylight
saving. Auto daylight saving function is used to automatically
gain the clock of the unit an hour for the specified time period.
Start/end time of the auto daylight savings can be checked
and if needed, changed.
Before you start recording, accurately set the present date
and time.
The recording and playback are not performed properly
when the clock of this unit does not run. Check that the
clock of this unit is running before operation.
Setup Menu
4
System
1
Time/Date Setting
Day Light Saving Setting
D
1. Set the present date, month, year, hour, minute, and
step
second.
2. Select the desired setting for daylight saving.
step
Auto: Automatically adjust forward or back an hour
for the time period set in the <Day Light Saving
Setting>.
Off: Auto daylight saving function is not used.
3. Date and time of Auto Day Light Saving Setting can
step
be adjusted as needed.
The time is indicated using the 24-hour system.
This unit uses 4 digits to display the year. The
available display range is 37 years between 1/1/2001 to
31/12/2037. The unit is also equipped with a
function to automatically calculate leap years. The year
returns to 2001 after 31/12/2037.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
12
System
Time/
1, 2
steps
3
step
Advertisement
Table of Contents
