How to set the menus
Setting the menus
The operations of this unit can be set via a menu displayed on OUTPUT A monitor. You can select and set the menu by using
the buttons on the front panel or using a USB mouse connected to the unit. When using the front panel buttons, the numbers 1-
16 (camera number buttons) and letters A to E (SPLIT screen buttons) represent the GUI button of the menu screen.
The menu can only be displayed through OUTPUT A monitor. The menu cannot be displayed through OUTPUT B monitor.
Setting the menu using a mouse
Left button
Setting the menu using the front panel buttons
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
8
Wheel
Right button
Mouse
M-DET
DOT ON/OFF
M-DET
AREA SET UP
Use the standard USB mouse which has left and right
buttons as illustrated to the left. Note that you cannot use
the mouse with this unit depending on the mouse
connected.
1. Use the left and right mouse buttons to set the menu.
step
•
Click the left button to open the menu or select
a needed item, etc.
•
Click the right button to set the active area for
motion detection function.
•
The wheel on a mouse does not work with this
unit.
1. Use the SET UP button, camera number buttons,
step
and the SPLIT screen buttons (A to E) to set the
menu.
•
Press the SET UP button to display the menu
screen.
•
Press the camera number buttons (1 to 16) and
the SPLIT screen buttons (A to E) to open each
menu or select the needed item.