Panasonic KX-TD500 Features Manual page 131
Digital super hybrid system
Hide thumbs
Also See for KX-TD500:
- System reference manual (1574 pages) ,
- User manual (554 pages) ,
- Programming manual (393 pages)
Table of Contents
Advertisement
3. Silence Detection:
Used to disconnect the trunk line when the system detects no signal during a CO-to-CO
line call by DISA or AGC.
• DISA Call Re-try by Pressing
The " " key can be entered during a DISA call. The action taken by the system depends
upon System Programming <Section 2.8 System Option, "14. Dialing " " in DISA CO-to-
CO talking" in the Programming Guide>.
If "Disconnect and make a new call" is selected, then the system will disconnect the current
call and prepare for a new call. Otherwise, the
other party.
• Intercept Routing
The Floating Number of a DISA OGM Group may be selected as the destination of
Intercept Routing.
• What if the destination is busy?
If the destination has enabled Call Waiting, then he will hear the Call Waiting tone.
Otherwise, the caller may hear a busy tone, or the call is redirected to the IRNA destination.
This is determined by System Programming <Section 2.8 System Option, "17. Destination
Busy - DISA" in the Programming Guide>.
• What if an illegal number is dialed?
The caller may hear a reorder tone, or the call is redirected to the IRNA destination. This is
determined by System Programming <Section 2.8 System Option, "21. Illegal Number -
DISA" in the Programming Guide>.
• How many times does the IRNA destination ring?
This is determined by System Programming <Section 2.5 System Timer, "Call Forwarding
- No Answer Time" in the Programming Guide>.
• When all resources on the DISA card are busy, a maximum of 12 calls are put in waiting
status until DISA IRNA Time expires. If the DISA resource remains busy, the call is
redirected to the IRNA destination. If the IRNA destination is not programmed, the call
waits until the DISA resource becomes idle.
If the 13th or later call comes in on the DISA resource, it is redirected to the IRNA
destination immediately. If the IRNA destination is not programmed, the call is kept
waiting with a ringback tone.
Installation Manual References
• 2.6.1 DISA Card (KX-T96191)
• 2.6.3 RMT Card (KX-T96196)
• 2.6.4 ERMT Card (KX-TD50197)
Features Guide
will be transmitted down the line to the
General Features
131
Advertisement
Table of Contents
