External Feature Access - Panasonic KX-TD500 Features Manual

External Feature Access

Description
Allows the extension user to have access to the features of a host PBX, Centrex or Central
Office, such as Call Waiting, etc. This is performed by putting the current party on hold and
sending a flash signal to the other end during an outside call.
Conditions
• FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting
the current call.
This is determined by System Programming <Section 2.8 System Option, "3. FLASH
button operation while CO talking" and "4. FLASH button operation when "Don't release
the trunk" is selected at #3" in the Programming Guide>.
• Flash Time
The flash time must be assigned as required by the Centrex, host PBX or CO line.
• Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing or
One-Touch Dialing works as External Feature Access, not as Flash (Disconnect Signal)
used to disconnect the calls.
• <PT>
FLASH button or the feature number is used to perform this feature.
• <SLT>
Feature number is used to perform this feature. This feature does not function, if an SLT
has a call on Consultation Hold.
Programming Guide References
• 2.3 Numbering Plan
– External Feature Access
• 2.8 System Option
– FLASH button operation while CO talking
– FLASH button operation when "Don't release the trunk" is selected at #3
• 3.2 Trunk Group
– Flash Time
– Max. Dial No. after EFA Signal
Features Guide References
1.3 System Features
• Host PBX Access
1.12 Conversation Features
• Flash
Features Guide
General Features
275