Panasonic KX-TD500 Features Manual page 366

ISDN Features
3.
Number to be added
The dials to be inserted at the beginning of the digits processed in Step 2.
[Example]
Digit to receive DID: 4 (digits)
Digits to delete: 1 (digit)
Number to be added: 2
The System modifies the received MDN number "4311" into "2311" as follows:
Processed in Step 2: 4311
The first digit 4 was deleted. This results in "311."
Processed in Step 3: 311
The digit 2 was added to the beginning of "311." This results in "2311."
DID Dial Registration
The System converts the modified number into the destination DN or FDN according to this
table.
[Example]
The System searches for the number "2311" in the table. When matching is found, the call rings
the corresponding extension or floating station.
DID / MDN No.
(Max. 16 digits)
Conditions
• This service is available for ISDN BRI line only.
• What if the dialing digits received is not enough to decide the call destination?
If the number of digits received is less than the number which is programmed in "Digit to
receive DID," reorder tone is sent to the caller, or the call is redirected to the IRNA
destination (IRNA feature). This is determined by System Programming.
• What if the call destination is busy?
If the destination of an MDN call is in busy status, the caller may hear a busy tone, or the
call is redirected to the IRNA destination or the call waits until the destination becomes idle.
This is determined by System Programming.
Installation Manual References
• 2.5.6 BRI Card (KX-TD50288)
366
311
2311
Destination
(Day)
2311 2000
Destination
(Night) (Max. 10 characters)
3000 PANASONIC
Name
Features Guide