Removing The Developer Material - Toshiba 1550 Service Manual

(5) Pay special attention to the overlapping of the side shields (front and rear) and the rubber seal when
installing the top cover; the rubber seal should be over the side seals.
Rubber seal
Side seal
10.3.3

Removing the developer material

While tilting the developer unit, let the developer
material drain out from the position shown with an
arrow. Be careful not to allow gears and connec-
tors nearby to get stained with developer material.
Mar. 1998 © TOSHIBA 10 - 5 1550/1560 DEVELOPER