7.3 Disassembly and Replacement
At the time of disassembly or replacement, first remove the covers, process unit, original glass, etc., as
required.
7.3.1
Auto exposure PC board and damp
heater
(1) Remove the original glass and move carriages
1 and 2 to the exit side.
(2) Remove the optics cover (1 screw).
Damp heater: (Option)
•
Remove three screws, three clamps and dis-
connect one connector.
Auto exposure PC board:
•
Remove one screw, disconnect one connector
and the PC board can be replaced.
1550/1560 OPTICAL
Clamp
Auto exposure PC board
7 - 6
Optics cover
Damp heater
Connector
Mar. 1998 © TOSHIBA