Bypass Feed Section; Bypass Feed Roller; Removal Of The Separation Pad; Removal Of The Clutch - Toshiba 1550 Service Manual

6. 5 Bypass feed section (1560 only)
6.5.1

Bypass feed roller

(1) Remove the main switch/door switch. (See item
2.4.2 [E-2])
(2) Remove the feed roller stop-ring.
(3) Take out the feed roller.
6.5.2

Removal of the separation pad

(1) Remove the main switch/door switch (See item
2.4.2 [E-2]).
(2) Take off the rear-side spring of the separation
pad and remove the separation pad.
6.5.3

Removal of the clutch

(1) Remove the main switch/door switch. (See item
2.4.2 [E-2])
(2) Removal the clutch and the paper sensor.
(3) Close the upper unit.
(4) Remove 2 screws from the upper unit, slide the
unit to the front and take it out in the direction
of paper feeding.
(5) Remove the hexagonal screw and the stop-ring
of the clutch and take out the clutch.
1550/1560 DRIVE
5. 2 (9) Stop-ring
6.5.1 (3) Stop-ring 6.5.1 (3) Stop-ring
Separation pad holder Separation pad holder
Separation pad holder Separation pad holder
6.5.3 (4)
6 - 12
Pick-up roller
Pick-up roller
<Illustration
Paper-feed roller
Paper-feed roller
<Ill
6.5.2 (2) Spring
5. 3 (9) Spring
6.5.2 (2) Spring
Mar. 1998 © TOSHIBA