Clutch And Aligning Rollers - Toshiba 1550 Service Manual

Clutch and aligning rollers (upper/lower):
(1) Remove the plate spring (1 screw).
(2) Snap off the clip.
(3) While pushing down the claw, pull out the bush-
ing toward the front.
(4) Disconnect one connector.
(5) While pushing down the rear claw, pull out the
bushing toward the rear.
1550/1560 FEEDER
Clip
Bushing
Claw
Claw
8 - 6
[Front side]
Plate spring
Connector
Clutch
Mar. 1998 © TOSHIBA