Preparing Pss To Test The Radio Signal Strength - Panasonic kx-ns0154la Installation Manual

5.5.2 Preparing PSs to Test the Radio Signal Strength

After locating the CSs temporarily, you can execute the Radio Signal Test using the PS. Directly after entering
Radio Signal Test mode, the PS scans channel for a CS that it can connect to. The channel to be scanned
can be changed by pressing the appropriate keys.
Using the KX-TCA185/KX-TCA285/KX-TCA385 PS
If the PS is not registered:
1.
Press MON.
2.
Press OK.
The PS will enter Radio Signal Test mode.
If the PS is registered:
1. If the PS is on, turn it off by pressing and holding the POWER/
CANCEL key.
2. Turn on the PS by pressing and holding the POWER/CANCEL key.
3. A blank screen will be displayed. Press and hold the TALK/
SP-PHONE key for about 8 seconds.
4. Press the left soft key, press [1], and then press [9].
5. Press OK.
The PS will enter Radio Signal Test mode.
Note
If the PS is in the communication range of the unit, the cyclic tone
outputted from the PS can be heard from the PS by looping back
the unit.
6. Confirm that the CS ID number on the screen matches the previously
noted CS ID number.
If the CS IDs do not match, press NEXT and search the other CSs.
•
RSSI: Received Signal Strength Indicator
•
If RSSI/Error Rate value is stronger than threshold level, the color
of the text background becomes green.
5 Appendix
RADIO STRENGTH
<<< MEASURING >>>
CS-ID:
RSSI:
Error Rate:
Installation Guide 45