Registering Ip Cell Stations To The Kx-Ns Series Pbx - Panasonic kx-ns0154la Installation Manual

5 Appendix
5.9 Registering IP Cell Stations to the KX-NS series
PBX
Note
The following procedures are based on the KX-NS1000 PBX.
Registering the IP-CS
Note
The KX-NS series PBX supports only IP-CSs directly.
1. Connect the PC to the MNT port of the PBX with an Ethernet straight cable.
2. Launch your Web browser and in the address bar, enter the following address corresponding to the
PBX exactly as shown:
–
http://kx-ns1000
–
http://kx-ns700
Note
Be sure to include the period at the end as shown.
3. Log in using the Installer level account name and password.
–
The login name for the Installer level account is "INSTALLER".
–
The default login password for the Installer level account is "1234".
CAUTION
To avoid unauthorised access and possible abuse of the PBX, we strongly recommend:
a.
Keeping the password secret.
b.
Changing your password regularly.
c.
Selecting a complex, random password that cannot be easily guessed.
4. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b.
Move the mouse pointer over Site Property and
click Main.
c.
Select Manual for IP Terminal Registration Mode.
d.
Click OK.
5. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
Click Virtual ® V-IPCS4.
b.
c.
From the Total number of cards drop-down list,
select the desired number of cards.
d.
Move the mouse pointer over a V-IPCS4 card that
has been added. A menu will be shown under the
mouse pointer.
e.
Click Port Property.
6. Click Registration.
A dialogue box will appear. Non-registered (available)
IP-CSs are displayed on the left.
66 Installation Guide