Ps Area Check (Kx-Tca185/Kx-Tca285/Kx-Tca385 Only) - Panasonic kx-ns0154la Installation Manual

5.13 PS Area Check (KX-TCA185/KX-TCA285/
KX-TCA385 only)
In this section, you can check the service area, handover and voice quality alone using 2 registered PSs under
actual conditions.
Starting the PS in Maintenance Mode
To enter Maintenance mode, follow the procedure below:
Note
Before using an PS, the battery must be inserted and then charged for the specified amount of time. For
details, refer to the documentation for the PS.
1.
The PS should be in a powered off state. If the PS is turned on, turn it off by pressing and holding the
POWER/CANCEL key.
2.
Turn on the PS by pressing and holding the POWER/CANCEL key.
3.
After turning on the PS, a blank screen will be displayed. At this time, press and hold the TALK/SP-PHONE
key for about 8 seconds.
4.
Press the left soft key, press [8], and then press [1].
The Maintenance mode screen will be displayed.
5.
Press .
The Maintenance mode main menu will be displayed.
Entering PS Area Check mode
1.
Start the PS in Maintenance mode.
2.
Select "PS area check", and then press .
5 Appendix
Installation Guide 71