ABB 800xA Operation page 133

Section 9 Heat Exchanger Asset Monitor (HXAM)
will show
except when the Status field says
The fields in the Heat Duty tab are:
•
•
3BUA000150-600
when the Asset Monitoring Server is not running and
0
Delta HD Monitor:
– Status: This field gives the status of the Delta HD Monitor. The different
status that one might see here are as follows:
Enabled:
Not Enabled:
Stale Data in Trained Set: If one or more BOPS is stale
Not Available:
Data Unavailable:
– Limit Reached: Gives the subcondition for the
Delta_HD_Operating_Point condition. The different subconditions that
will be reported during Monitoring are:
Normal:
High:
– Delta HD: Gives the value of Delta HD for the current OPS.
HD Hot Monitor:
– Status: This field gives the status of the HD Hot Monitor. The different
status values are:
Enabled:
Not Enabled:
Stale Data in Trained Set: If one or more BOPS is stale.
Not Available:
Data Unavailable:
.
Enabled
If Delta HD Monitor is enabled
If Delta HD Monitor is not enabled
During Training
If Delta HD Monitor is enabled, but
Delta HD data is not available.
Delta HD is within the Normal range.
Delta HD has crossed the
Delta_HD_High Limit.
If HD Hot Monitor is enabled.
If HD Hot Monitor is not enabled.
During Training.
If HD Hot Monitor is enabled, but
HD Hot data is not available.
HXAM_G_Faceplate
otherwise
-1
133