ABB 800xA Operation page 167

Section 9 Heat Exchanger Asset Monitor (HXAM)
Tube Velocity Tab
The Tube Velocity tab
being assessed. This tab is the view of HXAM_ST_Tube_Velocity_FE Aspect.
Figure 75. Tube Velocity Tab
The Limit Reached field for Tube Velocity Monitor will show
Asset Monitoring Server is not running or if Status field says
Stale data in Trained Set
Velocity will show
otherwise, except when the Status field says
The fields in the Tube Velocity tab are:
•
•
3BUA000150-600
(Figure
when the Asset Monitoring Server is not running and
0
Status: This field gives the status of the Tube Velocity Monitor. The different
status values are:
– Enabled: If Tube Velocity Monitor is enabled.
– Not Enabled: If Tube Velocity Monitor is not enabled.
– Stale Data in Trained Set: If one or more BOPS is stale.
– Not Available: During Training.
Limit Reached: Gives the subcondition for the Tube_Velocity condition. The
different subconditions that will be reported during Monitoring are:
75) shows the details of the Tube_Velocity condition
TC08470A
, or
Not Enabled
Enabled
HXAM_ST_Faceplate
when the
Normal
Not Available
. Also the value of Tube
.
,
-1
167