ABB 800xA Operation page 29

Section 3 Condition Reporting and Monitoring
Table 1. Asset Tree Severity Indicator Icons (Old Icons)
Icon Severity
High:
501 to 750
Critical:
751 to 1000
NOTE:
1. Severity is defined by an increasing loss of device health and functionality.
Table 2. Asset Tree Severity Indicator Icons (Namur Icons)
Icon Severity
None
Blank
Low:
1 to 100
Low:
101 to 250
Medium:
251 to 500
3BUA000150-600
Function check: Asset functionality might be temporarily restricted, due
to ongoing work on the asset, e.g. as local operation, maintenance,
simulation, or a function check.
Failure: Asset functionality lost due to malfunction in the asset itself or its
peripherals.
None: No Asset Reporter or Asset Monitor associated with the asset,
Asset Monitor is disabled or has never been downloaded, or Asset Monitor
has never run for this object.
Normal: No maintenance required.
Maintenance required: Maintenance required soon to avoid functional
restrictions, e.g. caused by a nearly exhausted wear reserve or
operational conditions.
Maintenance required: Maintenance required now to avoid functional
restrictions, e.g. caused by an exhausted wear reserve or operational
conditions.
Out of specification: Asset is operating outside specified limits, caused
by internal problems or process characteristics.
Maintenance Alarm Definition
Maintenance Alarm Definition
Asset Viewer
1
(Continued)
1
29