Panasonic KX-TDA100 Features Manual page 117

*3
:
*4
:
6.
Optional Assignment
Authorisation Code for a Tenant
An Authorisation code can be assigned for each carrier and each tenant.
Authorisation Code for a Trunk Group
An Authorisation code can be assigned for each trunk group and each carrier.
Itemised Billing Code
An Itemised Billing code can be assigned for each extension and for each verified code.
If a call is not made from an extension (e.g., DISA or TIE) and no verified code is used, the
Itemised Billing code assigned in the location 1 of the verified code will be used.
Conditions
WARNING
The software contained in the ARS feature to allow user access to the network must be
upgraded to recognise newly established network area codes and exchange codes as
they are placed into service.
Failure to upgrade the premises PBXs or peripheral equipment to recognise the new
codes as they are established will restrict the customer and the customer's employees
from gaining access to the network and to these codes.
KEEP THE SOFTWARE UP-TO-DATE WITH THE LATEST DATA.
• The Dialled Number on the SMDR
It is possible to choose to print either the user-dialled number or the modified number on
the SMDR through system programming. (
(SMDR))
• ARS Data Download/Upload
It is possible to download or upload the following ARS data to the PBX using PC
programming:
–
2
–
3
–
4
This is useful when a carrier has changed the call charge, and the updated data can be
used for multiple customers.
• A TRS/Barring check is done before ARS is applied. (
Barring (Barring))
ARS Carrier Access Code [353]
ARS Trunk Group for Carrier Access [351]
15
ARS Leading Number Exception Table
ARS Leading Number Table
ARS Routing Plan Table
1.9 Automatic Route Selection (ARS) Features
13
14
1.25.1 Station Message Detail Recording
1.8.1 Toll Restriction (TRS)/Call
Feature Guide 117