Panasonic KX-TDA100 Features Manual page 163

[Example]
(System Speed
Dialling No.)
*1
:
*2
:
3.3 Caller's Name Reference
A name can also be shown on the display or SMDR. The PBX searches for the name
in the following order:
1) Personal Speed Dialling data of the original called extension
2) System Speed Dialling (Caller ID) Table
3) Caller ID name received from the public line (Caller ID Name Reference)
If the name is not found, it will not be displayed.
Conditions
[General]
• Caller ID signalling type can be selected through system programming (
Type [490] (KX-TDA30/KX-TDA100/KX-TDA200 only)).
• The Caller ID Name Reference is only available for calls from the public network.
• For Users in New Zealand only
Using the toll services of a company other than Telecom NZ.
If the PBX is set up to use the toll services of a company other than Telecom NZ, the
telephone numbers dialled from the Caller Display listings within the PBX will be directed
through the toll services of the other company because the telephone numbers include the
toll access digit and area code digit. A toll charge may be incurred. Please check with the
toll carrier concerned.
[Caller ID to SLT Port (KX-TDA15/KX-TDA30 only)]
• Hardware Requirement: The EXT-CID card
• Through system programming, a group of 4 SLT or Super Hybrid ports can be assigned
to receive Caller ID. Up to 2 groups can be programmed. Therefore, a maximum of 8 SLTs
can receive Caller ID.
• When the caller's number is sent to an SLT, a Trunk Access number can be automatically
added to the telephone number through system programming for calling back.
• When the caller's number exceeds 16 digits, the SLT receives only the first 16 digits, not
counting the preceding Trunk Access number (if it is programmed to be added).
• If a call is transferred to an SLT, the transferring extension's information will be shown on
the SLT. If the transferring extension goes on-hook, the original caller's information will be
shown.
• When the Caller ID has information, such as private, out of area, or long distance, the
information will be shown instead of the caller's number and name.
Location
Telephone No.
000 90123456789
001
:
System Speed Dialling Number [001]
System Speed Dialling Name [002]
System Speed Dialling
*1
Name
ABC Company
:
:
1.17 Caller ID Features
CLI
*2 Destination
200
: :
: :
Caller ID Signal
Feature Guide 163