Panasonic KX-TDA100 Features Manual page 223

basis through system programming: Called Party's Name/Number or Caller's Name/
Number.
• Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension
number assigned to the following groups:
Method
Incoming Assign all desired
Call PSs to one incoming
Distribution call distribution group
Group (
Distribution Group
Member [620]), and
set the group call
distribution method
for the group to
"Ring".
PS Ring Assign all desired
Group PSs to one PS ring
group.
• When a PS joins a PS ring group, the following personal settings are disregarded:
a)
When the PS ring group is called:
– Delayed Ringing
– Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
– The setting which is assigned on the PS (e.g., FWD)
– The status of the PS (e.g., busy)
b)
Log-in/log-out setting (from the PS ring group/from the incoming call distribution
group which the PS ring group belongs to). (
Note
Log-in/log-out setting of the PS ring group from the incoming call distribution group is
also disregarded.
Log-out
Assignment
All PS users in the
group can use the
Log-in/Log-out
Incoming Call feature, Wrap-up
feature, and ICD
Group button for
the group.
Only one channel
is used when a
call arrives at the
group.
PS Ring Group
Log-in
1.24 Portable Station (PS) Features
Merit Demerit
The CS may often
be busy as each
PS in the group
uses one channel
when a call
arrives at the
group.
PS users in the
group cannot use
the Log-in/Log-
out and Wrap-up
features.
1.2.2.6 Log-in/Log-out)
Details in
• 1.2.2
Incoming
Call
Distribution
Group
Features
–
Feature Guide 223