Sharp AR-FX2 Service Manual page 11

21) Attach the ground plate.
G Hang the hook, and fix with M3 screw (gold) packed together.
22) Attach the rear cabinet of the machine.
G Cut off the notch section in the rear cabinet with nippers so that the
cut surface is flat. Attach the FAX connector cover.
Fix with the screw and attach the document cover.
M3 x 8 for steel
M3 x 8 for steel
23) Time setup check
G Change the time setup referring to the SIM 26-22
24) Stick the label to the rear cabinet of the copier.
G Stick the FCC Registration Label to the position shown in the illustra-
tion.
In order to manifest the compliance with FCC Part 68 and IC
CS-03, it is required to provide the machine with the FCC
Registration Number (USA), Ringer Equivalence (USA) and
Ringer Equivalence (Canada).
After installing the FAX expansion kit in the machine, please put
the registration label, packed with the kit, on the prescribed
location.
After installing this kit to the product, stick the supplied FCC Registra-
tion Label to the specified location.
FCC Registration Label
Reference line
M3X6
M3X6
M3x6
FAX connector cover
M4 x 10 for plastic
5mm
2. Expansion memory attachment (AR-
MM5, MM6, MM7)
1) Remove the FAX connector cover with a screwdriver.
2) Insert the memory card so that the model name is on the back.
3) Attach the FAX connector cover.
(1)
(1)
(2)
3 – 4
AR-FX2
(3)
(3)
Power on position
Power off position