Table of Contents
Advertisement
[7] USER PROGRAMS
1. List
Number
Program Name
DEPARTMENT CODE
101
SETTING
102
DIAL MODE SETTING
103
PAUSE TIME SETTING
SPEAKER VOLUME
104
SETTING
EXTENSION TEL.
106
SETTING
REMOTE RECEPTION #
108
SETTING
FW. RX DATA SETTING
109
FOR FAX DATA
TRANSFER
DISTINCTIVE RINGING
110
PATTERN
RECALL INTERVAL
111
(BUSY) SETING
RECALL TIMES (BUSY)
112
SETTING
RECALL INTERVAL (LINE
113
ERROR) SETTING
RECALL TIMES (LINE
114
ERROR) SETTING
INTERRUPT TX AT
115
RECALL MODE SETTING
# OF RINGS AUTO TX
116
SETTING
# OF RINGS AUTO RX
117
SETTING
POLLING SECURITY
118
SETTING
119
PASSCODE # SETTING
120
ID # SETTING
121
SYSTEM NO. SETTING
122
CONF. BOX # SETTING
RELAY PASSCODE
123
SETTING
AUTO REDUCE TX
124
SETTING
125
ROTATE TX SETTING
126
A3 RX REDUCE SETTING
131
OWN PASSCODE SET
132
RX REDUCE SET
133
PRINT COND. SETTING
TRAY SELECT IN RCV.
134
PRINT SETTING
TRANSACTION REPORT
137
PRINT SELECT SETTING
Soft SW
setup
SW30-4
Set to restrict the use of the fax function to certain departments.
SW44-1 ∼ 2
Set to select the type of phone line used for connection.
SW38-1 ∼ 4
Use to change the duration of pauses inserted in a recipient's fax number.
SW13-3 ∼
4, SW26-3
Set to increase or decrease the speaker volume.
∼ 4
SW16-2
Set to connect an extension telephone.
Set to enter a 2-digit number for the remote reception of faxes on an
SW2-1 ∼ 8
extension telephone.
Set to enter a phone number for the transferring of faxes that the fax
SW38-7
machine cannot output.
SW32-1 ∼ 4
Set the distinctive ringing pattern for your fax machine.
Set to change the time interval for dial retries when the recipient's line is
SW4-5 ∼ 8
busy.
SW41-1 ∼ 8
Set to change the number of retries when the recipient's line is busy.
Set to change the time interval for dial retries when there is a transmission
SW4-1 ∼ 4
error.
SW40-1 ∼ 8
Set to change the number of retries when there is a transmission error.
Set to control whether faxes waiting in memory will be sent when the
SW19-2
current job cannot be sent (for example, because of a busy signal).
Set to change the time that elapses before an automatic transmission stops
SW39-1 ∼ 3
when there is no answer from the recipient's fax.
SW29-5 ∼ 8
Set to change the number of rings for automatic reception.
Sets polling security so that only designated people can poll your fax
SW1-5
machine.
Use to create passcodes that contain the numbers of the fax machines you
No soft SW
want to allow to poll your fax machine.
Use to enter the ID number of fax machines you want to allow to poll your
No soft SW
fax machine.
No soft SW
Use to enter the system number of your fax machine.
Use to enter the mailbox number and passcode for confidential fax
No soft SW
reception.
Use to create a relay passcode list of fax machines that you want to allow
No soft SW
to make relay requests to your fax machine.
SW1-4
Set to control the automatic reduction of faxes before transmission.
Set to control whether the image of the original is rotated before
SW16-6 ∼ 8
transmission.
Set to control whether A3 size originals that are received are reduced.
No soft SW
Use to enter your own name and telephone number.
Set to automatically reduce the size of received faxes to fit the available
SW24-8
paper size.
Set to control whether a received fax that is bigger than the available paper
SW17-2 ∼ 3
is printed on several pages or automatically reduced.
Set to specify automatic paper selection or a specific tray that holds the
SW27-2 ∼ 5
paper for printing received faxes.
SW31-1 ∼ 6
Set to control when to print a transaction report.
7 – 1
Function
AR-FX2
Note
Advertisement
Table of Contents
