Sharp AR-FX2 Service Manual page 56

AR-FX2
<Communication result codes>
Error Final reception signal
code (Transmitting side)
0 Abnormal signal
1 NSF, DIS
2 CFR
3 FTT
4 MCF
5 PIP, PIN
6 RTN, RTP
7 No signal
8 PPR
9
10
11 RNR
12 CTR
13 ERR
14
15
16 Abnormal signal
17 NSF, DIS
18 CFR
19 FTT
20 MCF
21 PIP, PIN
22 RTN, RTP
23 No signal
24 PPR
25 RNR
26 CTR
27 ERR
28
29 V.8 Phase-1
30 V.8 Phase-2
31 V.8 Phase-3
(Note) For error codes 16 – 31, V.34 mode communication.
<Error codes 1>
21 Timeout standby for INFO0
22 Check sum error in INFO0
23 Timeout standby for tone A or B
24 Timeout standby for the first phase reversion
25 Timeout standby for cut off tone probing
26 Timeout standby for the second phase reversion
27 Timeout standby for probing end
28 Timeout standby for the third phase reversion
29 Timeout standby for INFO1
2A Check sum error in INFO1
2B Tone found before INFO1
2C Unexpected INFO0 found
Final reception signal
(Receiving side)
Abnormal signal
NSS, DCS
NSC, DTC
EOP
EOM
MPS
PRI-Q
DCN
PPS-EOP
PPS-EOM
PPS-MPS, PPS-NULL
RR
CTC
EOR-Q
PPS-PRI-Q
Abnormal signal
NSS, DCS
NSC, DTC
PPS-EOP
PPS-EOM
PPS-MPS, PPS-NULL
PRI-Q
DCN
RR
CTC
EOR-Q
PPS-PRI-Q
V.8 Phase-1
V.8 Phase-2
V.8 Phase-3
10 – 3
31 Timeout standby for turning off the reception control
channel
91 Error in the first CC train
92 Timeout standby for PPh
93 Tone A/B detected in CC retrain
94 Timeout standby for ALT
95 Ach found
96 FED OFF with CC data
97 Timeout standby for turning off CC
A1 A trouble which cannot be solved in phase 2. Retrain is
forcibly made.
B1 Trouble in S sequence of HDX-resync
B1 FED OFF in S sequence of HDX-resync
B2 Unexpected completion of S sequence in HDX-resync
B3 Timeout standby for S-Sbar in HDX-resync
B4 Timeout standby for S-Sbar in HDX-resync
B5 Timeout standby for S in HDX-resync
B6 Timeout for sync with PP
C0 Trouble in S sequence of phase 3
C1 FED OFF in S sequence of phase 3
C2 Unexpected completion of S sequence
C3 Timeout standby for S-Sbar of phase 3
C4 Timeout standby for S-Sbar of phase 3
C5 Timeout standby for S of phase 3
C7 Training due to TRN failure
D0 Trouble in S sequence of phase 4
D1 FED OFF in S sequence of phase 4
D2 Unexpected completion of S sequence
D3 Timeout standby for S-Sbar of phase 4
D4 Timeout standby for S-Sbar of phase 4
D5 Timeout standby for S of phase 4
D6 Timeout standby for MP
D8 Timeout standby for E
DA Timeout at renegotiation of the transmitter rate
DB Timeout at MPh of the transmitter
E2 Retrain detected in phase 2
E3 Retrain detected in phase 3
E4 Retrain detected in phase 4
FE DTR OFF in retrain
FF Tx setup port flag
71 Writing is not made to the first mapping frame.