Toshiba TOSVERT VF-AS1 Function Manual page 3

Introduction
Thank you for purchasing a "CC-Link Option (CCL001Z)" for TOSVERT VF-AS1 inverter.
This option can connect with open field network CC-Link and data communications with the
CC-Link master through installing this option in the VF-AS1 and using it. Besides this
instruction manual, the "CC-Link option Instruction Manual" is required to develop software
communicating with VF-AS1. In such a case, please get in touch with our branch offices or
sales offices. ("CC-Link Option Instruction Manual": E6581286).
This manual is also aimed at the operator using "VF-AS1 CC-Link option", so please use it for
future maintenance and inspection.
▼
▼
▼
▼
TOSVERT VF-AS1 Instruction Manual
・
TOSVERT VF-AS1 CC-Link Option Instruction Manual
・
NOTICE
See the instruction manual of "TOSVERT VF-AS1 CC-Link Option
Instruction Manual" (E6581286) for cautions relating to the ambient
environment, installation and wiring.
Turn off the power supply when connecting or disconnecting a
communication cable.
When the control power is turn off by the instantaneous power failure,
communication will be unavailable for a while.
The Life of EEPROM is approximately ten thousand times.
Avoid writing a command more than ten thousand times to the same
parameter of the inverter.
1 −
−
E6581288①
E6581301
E6581286