Network Analysis - Siemens HiPath 3000 Service Manual

ip_.fm
IP Fundamentals

Network analysis

13.3 Network analysis
Network analysis must be performed before installation of the relevant systems and
>
applications to guarantee smooth operation in the customer network.
Network analysis determines the conditions under which the customer's network is
suitable for HiPath 3000/5000. The result report is an integral component of the re-
quirement specifications in the HiPath 3000/5000 solution contract.
The Network Analysis service module is used to check whether the customer's communication
network is suitable for business-over-IP solutions from Siemens AG (HiPath 3000, HiPath
4000, HiPath 5000, etc.). The assessment is carried out on the basis of parameters preset by
the products. The customer receives a final report in which the network structure and operating
parameters (percentage utilization, delay, jitter) are documented.
Information can be found on the HiPath Network Analysis home page:
mens.de/es/products/prod_netzwerk_analyse_v2/product/home_page.
Customer benefits and cost-effectiveness
Preparation of the network for future applications (VoIP)
●
Determination of current traffic volume and percentage utilization, baselining
●
Decision-making assistance for the introduction of VoIP solutions
●
Network analysis performance specification
Examination of the suitability of customer networks for Siemens AG Voice-over-IP solu-
●
tions
Recording of relevant parameters over a predefined test time
●
Assessment on the basis of product specifications
●
Interpretation of test results with suggestions of further measures
●
Final report with recommendations
●
Configuration notes
For use when planning Siemens AG Voice-over-IP solutions
For use only in SNMP-based IP data networks (routers, IP switches, hubs)
13-6
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
https://netinfo.icn.sie-