4.3.3.4.3
Setting Up a Single Cabinet
Procedure
Step
1.
Remove the front and rear
2.
Place the system cabinet in the installation site and make sure that it is level and
stable.
4.3.3.4.4
Mounting a One-Cabinet System on the Wall (for U.S. only)
You can mount a one-cabinet system on the wall using the wall-mount kit.
Wall-Mount Kit
Latching assembly
Latch
Figure 4-49
HiPath 3750 - Wall-Mount Kit (for U.S. only)
Procedure
Step
1.
Install a plywood backboard at least 0.75 in. (19.05 mm) thick.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Activity
cover
from the cabinet.
Bracket for wall mounting
Swing-out component
Activity
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
Keyed holes
inst_h3.fm
4-93